PLATINISED TITANIUM STRIP ANODES ELECTRO PLATING - TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED TITANIUM ANODES AND PLATINIZED NIOBIUM ANODES

September 26, 2020 at 12:13 AMPlatinised

Tiaano Electro Plating Anodes consist of a titanium or Niobium based material in the form of expanded meshl, sheet, rod, wire, or pipe. The standard platinum layer thickness is 1.5 micron to 5 micron in case of higher loads layer thickness of up to 20 micron. The lifetime of platinised titanium anodes is in particular dependent on the work medium (electrolyte) and the anodic current (specific current density).

It should not exceed 75 A/dm2. The platinum wear is low under these conditions and the lifetime of the anode is calculable. According to experience, it is approx. 1-4 g platinum per one million ampere hours in fluoride-free chromium baths. In case of specific current densities of over 75 A/dm2 or upon the use of baths containing fluoride, we recommend the use of platinised niobium anodes.

Electro Plating Anode Substrate: Titanium / Niobium (As per ASTM Standard)

Electro Plating Anode Catalyst: Pure Platinum 99.99%

Major advantages of Platinised Titanium Anodes / Platinised Niobium Anodes:

     Long operating life & maintenance-free.

     Economical due to low platinum requirements.

     Low Consumption rate

     High dimensional stability, long durability and load resistance.

     Good current distribution.

     High corrosion resistance.

     Low weight (in particular expanded mesh anodes)

     Energy saving potential

     Long service time even at high current density

     Homogeneous deposition, higher quality of end product

     Replating very much possible

platinized_titanium_strip_anode

PLATINISED TITANIUM POSITIVE ANODES AND PLATINISED TITANIUM NEGATIVE CATHODES FOR WATER IONIZATION MEMBRANE ELECTRODE ASSEMBLY - TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED ANODES

September 25, 2020 at 11:44 PMPlatinised

Tiaano design and manufacturing different dimensions and Shapes of platinum or platinum coated anodes and cathodes for industrial alkaline water plant. The essential components of the ionization chamber are its two collecting electrodes, (the anode and cathode) the anode is positively charged with respect to the cathode. Water Ionizer Electrodes [Anodes or Cathodes] are available with hanging hook, frame or band in the form of sheet, expanded mesh, pipe, wire, rod and custom built.

As per customer request, Tiaano Design, Fabrication, and Supply of Electrodes Assembly / Membrane Electrolyzer (membrane Based Chambers) for Ionization application. The electrode assembly model consists of 2 plates, 3 plates, 5 plates, 7 plates and 9 plates for the production of Alkaline water (Ionized water) at the pH of 8.5 to 11.5 from positive chambers and acidic water at the pH of 6.5 to 6.5 from negative chambers. The alkaline water is for consumption purpose, whereas the acidic water is for disinfecting or sterilizing purposes.

Tiaano suggest the platinized Titanium anodes and Platinised Titanium Cathode for water alkaline process because of its advantages like no contamination in water, complex shapes is possible, Long lifetime, Easy maintenance, High dimensional stability and loading capacity, Good corrosion resistance, Low weight, Perfect current and distribution. Anodes and cathodes material will be similar. It will be consume proper equal voltage in all cells.

platinized_titanium_positive_anode

PLATINUM ACTIVATED TITANIUM ROD ANODES FOR ELECTRO PLATING - TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED TITANIUM ANODES AND PLATINIZED NIOBIUM ANODES

September 25, 2020 at 10:48 PMPlatinised

Platinum is the most effective metal for any electro chemical process due to its current conducting property. Platinum being the most expensive material rational utilization of Platinum for the greater benefit ensures economical solution. Platinized Anodes is none but a rational utilization of platinum by coating or plating limited quantity on to titanium to achieve the same result as using platinum metal. Tiaano offer Anodes Electrodes in Rods, Wire, Sheet, expanded Mesh, tube forms from stock.

Simple concept of the Electro Plating: - Direct current is supplied to the anode, oxidizing its metal atoms and dissolving them in the electrolyte solution. The dissolved metal ions are reduced at the cathode, plating the metal onto the item. The current through the circuit is such that the rate at which the anode is dissolved is equal to the rate at which the cathode is plated.

Possible applications of Platinum Activated Titanium / Niobium Electrode

Electroplating / Hard Chrome Plating / Electro winning / Electro Galvanizing / Electro Floculation, Metal Recovery / Metal Refining

Impressed Current Cathodic Proctection

Water Electrolysis / Electrochlorination / Electrodialysis / Sea Water Chlorination,

Sewage Treatment / Waste Water Treatment / Grey Water Treatment / Effluent Treatment

Chlor alkali Cells - Diaphragm / Mercury / Membrane cells, Chlorate Cells,

Iodate cells / Bromate Cells / Per Chlorate cells / Sodium Chlorate Cells,

Hydrogen Cells / FUEL Cells.

Platinum_Activated_Titanium_Rod_Anode

PLATINISED TITANIUM ANODE FOR HARD CHROME PLATING - TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED TITANIUM ANODES AND PLATINIZED NIOBIUM ANODES

September 25, 2020 at 4:43 PMPlatinised

Platinised Titanium Anodes are exclusively used in the Hard Chrome Plating application. Platinised Titanium anodes offer numerous benefits. There are Long life, dimensionally stable and easily fabricated into any shape, Homogeneous and long-lasting active surface, Energy savings with shaped anodes and small anode/cathode distances, Reduced environmental burden and reduced maintenance, Mesh anodes provide excellent throwing and can be used at high current densities, Easier handling and replating, Considerations when converting from Lead to Platinised Titanium anodes:

The service life of platinised titanium depends on both the electrolyte matrix and the applied current density. Therefore, in fluoride containing baths and at current densities >75 A/dm2 platinized niobium is recommended in preference to platinised titanium.

Platinized titanium and niobium anodes are completely or partially covered with a fee microns of platinum (usually 2.5 micron). Where the platinum is consumed after years of use, the underlying titanium or niobium passivates and the bath voltage rises at constant current operation. The base metals are not attacked at the usual operational voltages, in fluoride free chromium baths.

 

For most applications the platinum wear rate is very low and the corresponding anode life time high. In sulphuric acid chromium baths the platinum consumption is between 1g and 4g platinum per million amp hours. Careful design of the platinised anodes will increase their benefit and maximise their life span.   

platinized_Titanium_Mesh_Anode

TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED TITANIUM ANODE (Pt Ti Anode) PLATINIZED NIOBIUM ANODES (Pt Nb Anode)

September 21, 2020 at 11:08 AMPlatinised

Tiaano Customized Platinum plated Anodes or Electrodes are manufactured using the metal of titanium, niobium, tantalum in the production and Pure Platinum Coating. The electrocatalytic functional layers of platinum are used throughout virtually the entire electrochemical industry.

Platinised titanium anodes can only be used successfully in electrolytes which do not attack the titanium base. This excludes use at very low and very high pH values and also Chromium baths containing fluorides.

The service time of the platinised titanium anodes depends on the chemical resistivity of the base metal, the dissolution rate of the deposited platinum in the electrolyte, which in turn depends upon layer morphology, and adhesive qualities, pH, current density and current ripple.

For most applications the dissolution rate is low and the advantages of platinised titanium anodes are far greater than any metal loss. For fluoride-free chromium baths, the platinum consumption will be approximately 1 to 4 g of platinum per million Ah.

          Tiaano offer Quality, Economy, On-time delivery of Titanium Electrodes or Anodes Electro-chemical equipments, Engineering equipments under single platform to Marine, Chemical, Power, Water, Steel, Automobile, Electronics, Metal finishing and Aerospace Industries

          By using Precious metal oxides of Iridium, Ruthenium, Platinum, Palladium and exotic Metals like Titanium, Tantalum, Niobium, Zirconium, Nickel and their alloys to produce high premium and proving anodes for our customers.

          To save Power, reduce maintenance and assembly cost, resist corrosion and avoid product contamination.

Quality Assurance - Tiaano submit the below said Test Certificates along with Anode delivery.

1.         Platinum coating adhension test

2.         Platinum coating surface visual test

3.         Platinum coating surface microimages and coating composition (SEM, EDS) (Outsourcing at extra cost – if customer required)

4.         Platinum coating thickness test (SEM) (Outsourcing at extra cost – if customer required)

5.         Other test requested by customers.

Platinised_Titanium_Anode

PLATINISED TITANIUM ANODE FOR SHIP HULL CATHODIC PROTECTION BY IMPRESSED CURRENT (ICCP) - TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED TITANIUM ANODES AND PLATINIZED NIOBIUM ANODES

September 21, 2020 at 12:00 AMPlatinised

Impressed current cathodic protection (ICCP) Platinised anodes have been developed for protection of ship’s hull. Platinised titanium anode are being used in Naval and commercial ships requiring higher current density.

Smooth corrosion-free hulls minimise the power necessary to move ships through the water. Modern vessels, such as the tanker illustrated here in dry dock, are in many cases fitted with impressed current cathodic protection methods for corrosion protection. Platinised titanium counter electrodes used in part of such a system can be seen as four small horizontal strips in line with the propeller shaft.

The principle of impressed current cathodic protection is in connecting an external anode to the material to be protected from corrosion and passing of an external ( impressed ) electrical DC current. These impressed current anodes are also known as dimensionally stable anode or insoluble anodes.

These impressed current anodes are also known as dimensionally stable anode or insoluble anodes. Platinum is an excellent anode material due to its high conductivity and low consumption rate. Due to its high cost, it is not economical to use platinum by itself. So that platinized anodes are produced by electroplating a thin layer of platinum over a lower cost substrate such as titanium, tantalum, niobium or zirconium etc

Platinized CP Anodes Tiaano Offer

          Platinized Ti tubular, rod, mesh, ribbon anode for impressed current CP

          Platinised Ta wire anode for impressed current cathodic protection

          Platinized Nb probe, plate anode for ICCP

 

Application Waise Platinized ICCP Anodes Tiaano Offer

          Platinized impressed current anode for water tank, oil tank

          Platinized impressed current anode for marine, ship hull, structure

          Platinized iccp anode for water pipe, oil & gas pipeline, condenser

          Platinized impressed current anode for reinforced concrete, piling

          Platinized ICCP anode for offshore jetty, wharf and harbor structure

          Platinised iccp anode for onshore bridge, building, port structure

          Platinised impressed current cp anode for seawater intake, Jetties, marine structures

Platinised_Titanium_Anode

PLATINUM COATED TITANIUM ANODE FOR EQUIPMENT PART - TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED TITANIUM ANODES AND PLATINIZED NIOBIUM ANODES

September 20, 2020 at 10:07 PMPlatinised

Tiaano design and manufacturing different dimensions and Shapes of platinum or platinum coated Equipments or instrument or Equipment parts for various heavy application. Platinized titanium anode can be taken as a high quality and economical substitute of Platinum anode. It is made up of titanium substrate material and platinum plated (0.5~20 micron) on the titanium substrate material. Platinized titanium anode integrates good physical and chemical properties of platinum and titanium.

We (Tiaano) make the platinized titanium anode in shape of mesh, plate, rod, tube and other custom made shapes. We have leading technology in platinized titanium anodes which are very smooth on anode surface and can be nice substitute of pure platinum anode. The purity of platinum coating is 99.99%. Also we supply design, manufacturing, recoating and repair service.

Platinised titanium anodes combine the excellent electrochemical characteristics of platinum with the good corrosion qualities of titanium. They are characterised by the following features and advantages.

 •          High efficiency of current

•          High performance of corrosion resistance

•          Long service Life

•          The substrate can be restored when the anode lose its activity.

•          High current density, and high production efficiency

•          Low weight

 

Various Applications of Platinum Anodes

 •          Heavy equipments / Instruments Industry (Pistons, wheels etc…)

•          Cathodic Protection with high current densities, for example Sea water intakes, Heat exchanger & Condensers, Jetties & Tanks, Water Heaters

•          Electro synthesis

•          Electroplating Industries such as Precious metal plating, Gold plating, Electrolytic Cells, Rhodium Plating, Sensing Elements, Electro galvanizing, Electro chlorination,  Hard Chrome Plating, Waste water treatment, Precious Metal Recovery, Rotogravure printing, Fuel Cell, Laboratory / Research and Development

•          Electro-dialysis with reversal of polarity

 

•          Water Ionizer

 Platinum_Coated_Titanium_Anode

PLATINUM COATED TITANIUM EXPANDED MESH ANODE FOR INDUSTRIAL ALKALINE WATER PLANT - TIAANO MANUFACTURER AND SUPPLIER OF PLATINISED TITANIUM ANODES AND PLATINIZED NIOBIUM ANODES

September 20, 2020 at 9:05 PMPlatinised

Tiaano design and manufacturing different dimensions and Shapes of platinum or platinum coated anodes and cathodes for industrial alkaline water plant. The essential components of the ionization chamber are its two collecting electrodes, (the anode and cathode) the anode is positively charged with respect to the cathode. Water Ionizer Electrodes [Anodes or Cathodes] are available with hanging hook, frame or band in the form of sheet, expanded mesh, pipe, wire, rod and custom built.

Why platinum Anodes in Ionization process:

Most good ionizers on the market use electrodes made of platinum plated titanium. Titanium will not dissolve in your ionized water as the cheaper metals like stainless steel does. The ionizer uses grade 1 titanium (as per ASTM Standard) electrodes to be plated with a good electrical conductor. Stainless steel was used for Water Ionizer electrodes in the late 1980's and was found not be a suitable material because they did not last more than a  few years.

Also Increase anode lifetime without sacrificing quality, Maintain predictable and stable electrode position rates, a low consumption rate that conserves precious platinum, Favorable dimensional stability, Corrosion resistance ensures durability with easy maintainability, Light weight.

Tiaano suggest the platinized Titanium anodes and Platinised Titanium Cathode for water alkaline process because of its advantages like no contamination in water, complex shapes is possible, Long lifetime, Easy maintenance, High dimensional stability and loading capacity, Good corrosion resistance, Low weight, Perfect current and distribution. Anodes and cathodes material will be similar. It will be consume  proper equal voltage in all cells.

Platinum_Coated_Titanium_Expanded_Mesh_Anode

PLATINUM ACTIVATED TITANIUM ROD ANODE AND TITANIUM ROD CATHODE

June 15, 2020 at 12:12 AMPlatinised

Platinised Rod titanium and niobium Rod anodes are completely or partially covered with a fee microns of platinum (usually 2.5µm). Where the platinum is consumed after years of use, the underlying titanium or niobium passivates and the bath voltage rises at constant current operation. The base metals are not attacked at the usual operational voltages, in fluoride free chromium baths.

For most applications the platinum wear rate is very low and the corresponding anode life time high. In sulphuric acid chromium baths the platinum consumption is between 1g and 4g platinum per million amp hours. Careful design of the platinised anodes will increase their benefit and maximise their life span.  

Platinised titanium anodes combine the excellent electrochemical characteristics of platinum with the good corrosion qualities of titanium.  This anode is designed for Electro Plating application. They are characterised by the following features and advantages.

          Energy saving potential

          Low weight (in particular expanded metal anodes)

          Long service time even at high current density

          Dimensional stability, long durability of base material

          Replating possible

          Higher quality of end product

          Application-specific design

Type of Platinised Titanium Anodes or Electrode we offer:-

Ø  Platinized Titanium Rod Anode

Ø  Platinised Titanium Wire Anode

Ø  Platinised Titanium Sheet / Plate Anode

Ø  Platinised Titanium Expanded Mesh Anode

Ø  Platinised Titanium Perforated anode

Ø  Platinised Titanium Basket anodes

Ø  Platinised Titanium Tube Anode

Ø  Platinised Titanium Disc anodes

Ø  Platinised Titanium Strip anodes

Ø  Platinised Titanium Slotted anodes etc…

According to the substrate material used, the platinized anodes are classified as

1.       Platinized Titanium anodes

2.       Platinized Niobium anodes

3.       Platinised zirconium anodes

4.       Platinised Tantalum anodes

Specifications of Platinized Titanium Anode:-

Substrate

Titanium 99.9% pure As per ASTM Standard

Anode Shape

Titanium Sheet, Wire, Rod, Expanded Mesh, Tube

Plating (Catalyst)

Pure Platinum

Purity of Platinum Catalyst

100%

Platinum Thickness

1.5 to 20 Micron

Plating Process

Electro deposition

Catalyst Color

Silver White

 

Platinum_Activated_Titanium_Rod_Anode

PLATINIZED METAL SHEET ANODE FOR IONIZATION

June 14, 2020 at 10:31 PMPlatinised

Tiaano manufacturing different dimensions and Shapes of platinum or platinised electrode for water ionizers. The essential components of the ionization chamber are its two collecting electrodes, (the anode and cathode) the anode is positively charged with respect to the cathode. Water Ionizer Electrodes [Anodes or Cathodes] are available with hanging hook, frame or band in the form of sheet, expanded mesh, pipe, wire, rod and custom built. 

The best water to drink is alkalized or ionized water, which is produced by running normal tap water over a positive (platinized anode) and a negative (platinised cathode) electrode. This creates positive and negative ions in the water that are then separated creating two different waters, one that is alkaline and one that is acidic.

Alkaline water is for flushing out internal toxins, scavenging free radicals, and oxygenating the body. Acid water, which is really a by-product of ionizing water, can be used externally for cleansing the skin, cleaning any surface and feeding your plants.

Most good ionizers on the market use electrodes made of platinum plated titanium. Titanium will not dissolve in your ionized water as the cheaper metals like stainless steel does. The ionizer uses grade 1 titanium (as per ASTM Standard) electrodes to be plated with a good electrical conductor. Stainless steel was used for Water Ionizer electrodes in the late 1980's and was found not be a suitable material because they did not last more than a  few years.

Advantages of platinized Titanium Anode:-

Long operating life

Maintenance-free.

Economical due to low platinum requirements.

High dimensional stability and load resistance.

Good current distribution.

High corrosion resistance

Low weight.

Platinised_Metal_Sheet_Anode