PLATINUM METAL VALVE MESH TUBE FOR USING IN FPP MACHINE

August 25, 2022 at 11:41 AMPlatinised

The Tubes of the warming components of an infrared broiler have a restricted piece of their perimeter covered with a blend containing platinum. The platinum covering gives an intelligent surface to guide infrared radiation towards the item to be warmed inside the broiler. The warming component tubes covered with platinum give considerably a similar execution and are fundamentally more affordable to fabricate than customary warming component tubes with a gold intelligent covering.

Major Advantages:-

Titanium is its low cost, particularly when considering its lower density. The titanium is its poor conductivity; approximately 5 times less than niobium and 50 times less than copper. Low conductivity makes titanium poorly suited for long wire lengths and restricts its use to larger diameter, shorter anodes.

Material Considerations in Platinum Anode Design:-

Niobium (Nb): High cost, high breakdown potential, fair conductivity.

Titanium (Ti): Low cost, low breakdown potential, poor conductivity.

Platinum (Pt): High corrosion resistance, high cost, good conductivity.

Type of Anodes:-

1.    Platinum Plated Niobium Tube Anode

2.    Platinized Niobium Rod Anode

3.    Platinised Niobium Wire Anode

4.    Platinum activated Niobium Mesh Anode

 5.    Platinum Coated Niobium Sheet or Plate Anode

platinum valve

PLATINUM DISC - MMO COATED DISC USING RESEARCH & DEVOLPMENT APPLICATION

August 18, 2022 at 12:23 PMPlatinised

The leading anti-corrosion character, outstanding physical & mechanical properties, uniform current distribution characters of titanium, niobium - its Platinised anodes and Mixed Metal Oxide coated anodes are strongly recommended for Impressed Current Cathodic Protection (ICCP) application.

Application Of MMO / Platinised Disc :

Curved and Strip Anodes are grown explicitly for insurance of Dam and Navigation lock entryways.

Curved and strip anodes are intended to work in new, salty and seawater conditions - utilized in other appropriate applications.

Incorporates marine designs, water tanks and vessels. With a discretionary essential seal spacer gasket.

FABRICATION OF ELECTRODES USING PLATINUM:

Platinum is one of the most commonly used materials for implantable electrodes and there are a number of processing techniques that can be applied for dense, microfabricated arrays. In the following sections some of these techniques have been described.

ELECTRODEPOSTITION OF THICK PLATINUM STRUCTURES TO FORM IMPLANTABLE ELECTRODES:

The deposition of the platinum electrode is important in the overall performance of the electrode array. The material has to be deposited to the required thickness and provide a good bond to the substrate.

There are two techniques commonly used to deposit thick film platinum:

1.    Electrodeposition (or electroplating) and sputtering. The former is suitable for producing thick films, whereas the latter is only suitable for thin films.

 2.    In the case of implantable electrode arrays, there is a need to minimise the impedance of the electrodes, so thick films are preferred.

platinised disc

PLATINISED TITANIUM ANODE IN ELECTROLYSIS PROCESS - NEGATIVE PLATE & MMO COATED PLATE

August 13, 2022 at 3:01 PMPlatinised

Tiaano offers wide range and types of Platinized Titanium Anodes for various Electro Chemical and Electrolysis Application. Platinum titanium anode is an insoluble anode, platinum plating and titanium substrate with a solid and stable performance.

Technical characteristics of Titanium Anode :  High current efficiency; excellent corrosion resistance; long electrode life; electrode shape can be designed according to user needs; electrode substrate can be reused several times; no pollution to the medium (electrolysis); can withstand higher Current density.

Electrolysis Process : Electroplating, Electro Winning or electroextraction, Electrosynthesis, Electrodialysis, Drinking Water electrolysis, Cathodic Protection, Sodium Hypochlorite, HHO Generator, Swimming pool disinfectant, Perchlorate protection, Chlor-alkali industry etc...

Why are Platinum electrodes used in electrolysis?

1. Electrolysis is the process of passing the electric current in a solution that will chemically affect the solution.

2. This chemical change will further lead to the loss or gain the electrons in the solution.

3. Platinum is the metal that belongs to the periodic table, and it belongs to the noble metal group.

4. Noble metals mainly include Gold, Silver, Iridium, and Platinum.

5. Platinum is used in an electrochemical cell as it is resistant to oxidation.

6. It is less reactive so it does not easily react with any chemical substance.

7. It will also not take part in the redox reactions, that occur in an electrochemical cell.

 ELECTROLYSIS

TITANIUM PLATED SHEET ANODE USING IN IONIZATION PROCESS

August 13, 2022 at 12:52 PMPlatinised

Platinum plated anode and Platinum Plated titanium cathodes are using in ionization machine or process. We, Tiaano supplied Platinized anodes and Platinized cathodes for ionization industry to Indian and abroad customers. Ionization process takes place on passing of the current through the electrodes. The dissolved minerals get attracted either to the positive or negative electrode, therefore one of the chambers will have acidic water while the other will have alkaline water. The alkaline water is for drinking purpose, whereas the acidic water is for disinfecting or sterilizing purposes.

Why Platinum Plated Anodes required for Ionization Process?

Platinum is an impetus, and is expected to accelerate the electrolysis. With the water ionizers changing the water so definitely by ignoring the water the terminals, the ionization cycle wouldn't happen without a speeder-upper.

The Platinised Titanium cathodes make the ionization, the terminal cell is the core of an ionizer. It comprises of a progression of cathodes (plates), each isolated by a layer. The Platinized Titanium Mesh Anode is for the most part utilized, on the grounds that it has remarkable down to earth execution, for example, solid capacity of ionization discharge, great trade of electrolyte, close design and light weight, and so on.

We (Tiaano) offer Platinized Anodes for Water Ionizer:-

Platinum Plated Titanium Mesh Anode and Cathode

Platinum Titanium Sheet / Flat Anode and Cathode

Platinum coated Titanium Perforated Sheet Anode and Cathode

Platinum faced Titanium Slotted Sheet Anode and Cathode

Platinized Titanium Rod Anode and Cathode

Platinised Titanium Seamless Tube Anode and Cathode

IONIZATION PROCESS

FABRICATION & SUPPLY OF PLATINUM PLATING MESH USING IN GOLD PLATING

August 11, 2022 at 4:45 PMPlatinised

Tiaano manufacturer of corrosion-resistant Platinized Titanium anodes for gold forming and electroplating applications. Platinum coated (Platinized) Titanium Anodes are highly conductive anodes used in Gold plating. Platinized titanium metal anodes are most suitable for wet electro deposition of precious metals like platinum, palladium, chromium, nickel and copper etc.

Platinum coated titanium mesh are light-weight properties whilst remaining strong and rigid, it is quite often used in sporting goods such as tennis rackets, golf clubs, cricket and hockey gear, bike frames and more. You can expect high-performance qualities without weighing you down. This is particularly important if you're competing, where every second and every gram counts. Purchasing a titanium bike frame will see your climb that hill in significantly less time than a heavy alternative. Titanium is also vital in the medical industry as it is bio-compatible. It is not toxic to the body so is used in lots of surgical implants and implements. A titanium joint replacement can last up to 20 years. It is also used in the creation of crutches and wheelchairs to limit the weight of each item helping patients to recover more quickly with less stress of their joints.

What chemical is used for gold plating?

Potassium gold cyanide is the most important gold plating chemical. Almost all the gold used for contacts in the electronic industry is derived from potassium gold cyanide

Platinum Plated Titanium Metal Mesh Anode details:-

·         Tiaano: Manufacturer and Supplier of Platinum Plated Titanium Anode and Cathode Anode

·         Year of Established: 1992

·         Anode Application: Water Ionization / Ionizer Machine / Ionization Water

 ·         Installation at: Pune, India

GOLD PLATING

PLATINUM PLATED SHEET USING IN ELECTROWINNING APPLICATION

August 11, 2022 at 3:32 PMPlatinised

Electrowinning of platinum using a modified cyclone cell was performed. It shows the effect of flow rate, which is correlated in terms of linear velocity solutions at an applied potential of 2V and PH of 3. Here the linear velocity of the ratio of the flow rate to the cross sectional area of inlet in the cyclone cell. The concentration of platinum drops exponentially high rate, due to a turbulent nature while linear like shapes appear for the laminar flow case of 0.6 ms-1, and the rate of removal of platinum from the solution increases with the flow rate.

Platinum is the most effective metal for any electrowinning process due to its current conducting property. Platinum being the most expensive material rational utilization of Platinum for the greater value ensures economical solution. Platinum covered Anodes is none but a rational utilization of platinum by plating limited quantity on to titanium to achieve the same result as using platinum metal.

The platinized anode is characterized by its three outstanding effects as an electrode material:-

1. It is stable, corrosion resistant and can be used in various media.

2. For the oxygen evolution reaction, the over potential is very high

3. For the hydrogen evolution reaction, the over potential is very low.

What is the process of electrowinning?

Electrowinning (or electroextraction) is a process of whereby metals, such as gold, silver and copper,are recovered from a solution by means of electrolyticchemical reaction. This takes place when an electric current is passed through the solution.

Why is electrowinning used?

Electrowinning is most commonly used to recover gold, silver, copper, cadmium, and zinc. Gold and silver are the most successfully recovered metalsbecause of their high electropotential. Chromium is the only metal commonly used in electroplating that is not recoverable by electrowinning.

What is the Difference between Electrowinning and Electrorefining?

Electrowinning is defined as the process in which the metals from their ores are put in the solution that is they are electrodeposited to liquefy the metals.

Whereas in electrorefining, it is defined as the process in which the impurities from the metal are removed.

 ELECTROWINNG APPLICATION

PLATINISED TITANIUM PLATED MESH ANODE - NEGATIVE MESH ANODE

August 5, 2022 at 12:01 PMPlatinised

Tiaano design and manufacturing various dimension and Shapes of platinum or platinum covered anodes and cathodes for modern antacid water plant. The fundamental parts of the ionization chamber are its two gathering terminals, (the anode and cathode) the anode is emphatically accused of regard to the cathode. Water Ionizer Electrodes [Anodes or Cathodes] are accessible with hanging snare, casing or band as sheet, extended network, pipe, wire, bar and specially fabricated.

The expanded metal mesh ensures a good current distribution, increases the anode surface and allows a better circulation of the bath. Our know-how and the quality of our coatings, defined according to your needs, ensure the robustness and longevity of the anodes. Platinum is a precious metal, having very good physical and chemical properties, such as high corrosion resistance, thermal conductivity, and catalytic nature.

What is platinum electrode?

Platinum is a noble metal that is very stable and resistant to corrosion. Because of its stability, like Au, it is often used to make jewelry. As an electrode, it is used to oxidize organics or to generate hydrogen or reduce oxygen. You can order Platinum as a wire of various diameters or foil with different thicknesses.

Why is platinum an electrode?

Platinum is used in electrochemical cells because it is resistant to oxidation- it will not easily react, which makes in excellent as an electrode as it will not take part in the Redox reactions occurring in electrochemical cells.

Titanium Anode Mesh

PLATINIZED TITANIUM ANODES - TITANIUM PLATED SHEET

July 29, 2022 at 4:18 PMPlatinised

Tiaano manufacturing different sizes and Shapes (Multi slot, Multi hole, Perforated, Slotted, Mesh etc) of platinised Titanium Anodes and Platinized Niobium Anodes for Electro Plating. Platinised titanium anodes combine the excellent electrochemical characteristics of platinum with the good corrosion qualities of titanium.  This anode is designed for Electro Plating application.

The advantage that these Titanium Anodes have over the two previous anode types and lead anodes is that the risk of additional toxic or hazardous substances being introduced into the electroplating line is eliminated, eradicating costs that arise from the removal of hazardous substances. They are also environmentally friendly and the fact that the inter-electrode gap remains constant throughout the design life of the anode means that the Titanium Anodes maintain constant voltage and product quality. Oxygen-evolving Titanium Anodes have lower anodic operating potentials and use of these anodes yields the additional advantage of the ability to re-use the anodes. Once the anodes have reached the end of their design life the necessary repairs can be made, the anodes can be cleaned and then re-coated.

Major Advantages of Platinized Anodes in Electro Plating Industry:-

Typical Applications of Platinized Anodes are Gold plating-Jewellery Jewels, Printed circuit board industries, chrome plating, Hard Chrome plating, Fuel cell, Rhodium plating, Iron plating, Anodising plant, Copper plating, Silver plating, Ohmic heating of food, Sensing elements, Gold electroforming, Electro refining or , Electro galvanizing, Palladium plating, Nickel/Zinc/Tin plating, Cathodic Protection, Electrodialysis, electro chlorination.

Common Advantages of Platinized Titanium Anodes:-

•          Electrochemical inertness,

•          Mechanical strength,

•          Workability and favorable electrical conductivity.

•          Dimensional stability, long durability of base material

•          Application-specific design

•          A low consumption rate that conserves precious platinum

•          Resistance to oxidation

•          High chemical stability

The platinized anode is characterized by its three outstanding effects as an electrode material:

1. It is stable, corrosion resistant and can be used in various media.

2. For the oxygen evolution reaction, the over potential is very high

3. For the hydrogen evolution reaction, the over potential is very low.

Platinized_Titanium_Anodde

TITANIUM MESH ANODE AND PLATINISED TITANIUM MESH ANODE

July 22, 2022 at 10:02 AMPlatinised

Platinised Titanium Anodes are exclusively used in the Electro Plating Process. Tiaano Electrodes has the technology to platinum titanium substrates in the form of plate, wire, rod, tube, plate and mesh. Furthermore, we have the ability to manufacture complex fabricated anodes. The external surface of all platinised titanium anodes is essentially pure platinum which exhibits all the normal characteristics of the wrought metal as far as corrosion behavior is concerned.

Tiaano producing different sizes and Shapes of platinised Titanium Electrodes for water ionizers. The central pieces of the ionization chamber are its two social affair terminals, (the anode and cathode) the anode is positively blamed for respect to the cathode. The Platinum Titanium cathodes make the ionization, the terminal cell is the center of an ionizer. It includes a movement of cathodes (plates), each detached by a membrane. The Platinized Titanium Mesh Anode is generally used, because it has phenomenal valuable execution, for instance, strong limit of ionization release, incredible exchange of electrolyte, close development and light weight, etc.

What is platinum mesh used for?

Platinum Titanium mesh is used in chemical research. Among them, Titanium is less expensive; however, it has a much lower breakdown potential than Niobium or Tantalum. The titanium oxide breaks down at anodic potentials in the 12 V range.

Platinum Coated Titanium Mesh Anode – Ionization Mesh Electrode

July 20, 2022 at 10:22 AMPlatinised

Tiaano, Platinum Coated Titanium anodes and Platinum Coated Titanium cathodes for Water Ionization and water treatment modern applications. Platinised Titanium Anodes and Mixed Metal Oxide Anodes are tracked down in modern applications, for example, hypochlorite age in squander water, in treatment facilities, petrochemical plants and power plants, for consumable water supplies and in food handling. Marine applications remember the above as well as use for seaward stages and the anticipation of mussel, barnacle and algal development on ships frames. This anodes extraordinarily intended for Water Ionizations/Ionizer. Tiaano producing various aspects and Shapes of platinum or platinised terminal for water ionizers. The ionizer utilizes grade 1 titanium cathodes to be plated with a decent electrical channel with life span solid 10 years that will likewise not break up during electrolysis. Treated steel was utilized for Water Ionizer cathodes in the last part of the 1980's and was found not be a reasonable material since they didn't endure in excess of a couple of years. The business started utilizing titanium platinum-covered Anode in the mid 1990's a direct result of its plan life.

Benefits of platinum Coated Titanium Anodes and platinum Coated Titanium Cathodes:-

Long working life, without maintenance, Economical because of low platinum prerequisites, High layered security and burden obstruction, Good current dispersion, High erosion opposition, legitimate equivalent voltage in all cells and Low weight.

 Platinized Titanium & Niobium Anode (Dimensionally Stable Anode)

Ionization_mesh_Electrode