PLATINIZED TITANIUM ANODE RHODIUM JEWELRY PLATING

April 10, 2020 at 9:08 PMPlatinised

Plating anode or Platinized titanium anode designed to use in electro plating baths for Rhodium Plating and or acid-based gold solutions. The anode stem may be bent to hang over the edge of the Tank or Beaker, while the bar length can be bent into a circle and inserted into the solution.

Design for - Platinized titanium anode designed for use in electroplating baths for helium and palladium plating or acid gold solutions.

Adopt - The titanium mesh adopts electroplating machine and electrolyzed water, and the surface is effectively cleaned and activated by gold, silver and copper ornaments to clean the surface of the work piece.

Protect Jewelry - The titanium mesh uses electroplating machine and electroplating water, gold-plated surface, silver and copper ornaments, and is coated with a layer of platinum or gold to protect the jewelry and prevent oxidation.

Features - Titanium mesh is pure titanium material, which is not easy to dissolve, is not easy to change color, and has good electrical conductivity.

Can Be Bend - This platinized titanium mesh can be bent and hung on the edge of a heat-resistant glass beaker to allow the mesh portion to be immersed in the solution.

Platinised Titanium Mesh Anodes for Electro Plating - Standard sizes and Stock available (Delivery – 1 Week)

1.0       inches Height x 2.0 inches Width            1.0 inches Height x 3.0 inches Width

2.0       inches Height x 4.0 inches Width            2.0 inches Height x 3.0 inches Width

2.0       inches Height x 4.0 inches Width            3.0 inches Height x 4.0 inches Width

3.0       inches Height x 6.0 inches Width            4.0 inches Height x 1.0 inches Width

4.0       inches Height x 2.0 inches Width           4.0 inches Height x 3.0 inches Width

6.0       inches Height x 7.0 inches Width          

Expanded Mesh thickness: 2.5 mm (Non Flattened), Mesh Inner Opening Width and length 3.2 x 8.3 mm, Titanium Gr.1 or 2 mesh ASTM 265 B Standard and Platinum Thickness 1.5 micron, 2.0 micron and 2.5 Micron.

Platinized_Titanium_Anode

Comments are closed