Platinized Titanium & Niobium Anode Dimensionally Stable Anode

Tiaano offer Platinum plated Anode and cathodes (Electrodes) for various research and developments. Many article provides a history of platinised anodes by reviewing innovations in the chlor-alkali industry, electroplating, electro galvanizing, electro winning etc.... These anodes are attractive for numerous reasons (e.g., long life and educed energy consumption), but they must still overcome the hurdle of cost to gain wider acceptance for applications in the various process industries.

Chemical Behavior of Platinum and Titanium:-

Platinum is preferred on an anode's outer surface because it is highly resistant to corrosion and can ensure current flow in most electrolyte media without leading to the formation of an insulating layer on itself. Because it doesn’t corrode, it doesn’t produce corrosion products and hence the consumption rate is very low.

Platinum is inert in fused salts and acids, whereas it is dissolved in aqua regia. There is no risk of hydrogen embrittlement. It is one of the few rare metals that perfectly resist chlorides of seawater.

Titanium shows reasonably good resistance to a marine environment (seawater in particular). It does not react with concentrated (80%) solutions of metallic chlorides. However, it is susceptible to attack by hydrofluoric acid (HF) and hot hydrochloric acid (HCl) of higher concentrations. Even hydrogen peroxide and hot nitric acid can attack titanium. Oxidizing agents normally do not attack titanium because it readily forms a protective oxide coating. However, non-oxidizing substances such as sulfuric acid (above 5% concentration) and phosphoric acid (above 30%) can attack titanium. From a hydrogen embrittlement point of view, titanium fares better than tantalum as an anode material.

Advantages of Platinized Titanium Anodes:-

Platinum has the advantages of electro chemical inertness, mechanical strength, workability and favorable electrical conductivity. However, it is prohibitively expensive. Development of platinum on titanium and platinum on tantalum (plated) materials has opened up the feasibility of using these for anode materials for Electro Plating, metal finishing and cathodic protection systems in critical applications.

Tiaano Platinised Titanium Rod Anode for used to make Marine Growth Prevention System (MGPS).  The Marine Growth Prevention System (MGPS) was conceptualized and created with the sole purpose of defeating Marine Growth right at its very root, preventing even the most minute trace of marine organism from depositing itself along the ship’s interior altogether.

Key Benefits for Structures (Marine, Offshore & Industrial) protected by Anti-fouling Systems:-

Reduce maintenance costs , Lower costs on using high standards coatings, Increases life of the structures, Only solution to corrosion of inaccessible areas of steel such as the base of storage tanks, Reduces likelihood of leakage from buried and submarine pipeline caused by corrosion, Reduce repair bills for vessels, Longer intervals between dry dockings, Higher resale value, Prevent fouling built-up, Protect pipeline against corrosion, Kills Sculpture Reducing Bacteria (SRB), Full Automatic control and Lowers maintenance costs.