Platinized Titanium & Niobium Anode Dimensionally Stable Anode

Platinised Titanium or Niobium Probe / cantilever Anodes are designed for physically harsh environments where protective current is required. This anode provides superior endurance in condenser water boxes, large diameter piping, and storage tank , process vessels, Heat exchangers, Pipes and Heater box internal etc…

Tiaano platinised titanium anodes are available in a wide range of sizes, shapes and types to suit the majority of marine and onshore applications, and are specially designed and manufactured for each project to ensure suitable output and life characteristics. During operation of a platinised titanium anode, the platinum is consumed. The actual consumption rate of the platinum is dependent on many factors, including the nature of the electrolyte and the current density at which the anode is operating. To permit flexibility of anode design, the platinum coating can be electro deposited onto the titanium at different thicknesses during manufacture. The most common thicknesses being 2.5 microns, 5 microns and 7.5 microns, although thicker plating can be provided for particularly severe applications.

Tiaano manufacturing and supplying platinised titanium or Niobium anodes with complete assemblies and cable tails, and mounting arrangements. These assemblies incorporate elements in rod, tube and sheet form.

Water ionizer Platinised Titanium electrodes are one of the most important components, it falls into many basic forms like sheet, rod, tube or mesh. Water Ionization chamber contains positively and negatively charged platinum-covered titanium electrodes. These electrodes ionise the soluble minerals in the water: positively charged ions gather at the negative electrode to create alkaline water, also referred to as "reduced water" while negatively charged ions gather at the positive electrode to make acid water, also known as oxidized water.

Alkaline Water, which comes out of the top spout on the ionizer, is the fraction that we drink and cook with.  It contains a high concentration of positively charged minerals that are beneficial for our health, such as calcium, potassium, and magnesium.

Acidic Water, which is dispensed through the bottom hose or spout, is used externally for cleaning and disinfecting the skin and household surfaces.  It is discharged into the sink when it is not needed or saved for later use.

Platinum plated titanium anodes have been successfully used in hard-chrome plating. As long as suitable electrolytes are used, a completely lead-free process is usually possible without excessive costs by simply replacing lead anodes with Pt/Ti anodes. Plating anodes using high-temperature electrolysis offers two additional ecological benefits: Considerably longer life span based on better durability. Sparing use of platinum (which is made resistant to corrosion through high-temperature electrolysis). Re-platinization of the base substrate means that any existing platinum can be refurbished and reused, saving costs.

Another benefit of the Platinised anode is that they require no touching up due to the dimensional stability and the high-temperature electrolysis that allows up to 99.99% purity in platinum coatings, as well as excellent adhesion and ductility.

An investment of three to five times the annual costs for standard lead anodes in the first year, and a company can expect to break even within around three years of installation.

Tiaano manufacturing and supplying different sizes and different shapes with various substrate material (titanium, niobium) of platinised anode for water ionizers.

When the body is in it''s natural alkaline state, body weight and insulin production normalize. When we alkalize the body, it works so well at dropping excess weight that many of us lose weight just by eating more alkaline foods, and by adding supplements that alkalize, to our diets.

The best water to drink is alkalized or ionized water, which is produced by running normal tap water over a positive (platinum or platinized anode) and a negative (platinum or platinised cathode) electrode. This creates positive and negative ions in the water that are then separated creating two different waters, one that is alkaline and one that is acidic.

Alkaline water is for flushing out internal toxins, scavenging free radicals, and oxygenating the body. Acid water, which is really a by-product of ionizing water, can be used externally for cleansing the skin, cleaning any surface and feeding your plants.

Platinized Titanium Anode for Chlorination System:-

Platinized Titanium Anode for Seawater and Salt Water Chlorination System On-Site Chlorine Generator, Chlorination Device, Swimming Pool Salt Chlorine Generator. Electrolytic seawater Sodium Hypochlorite Generator using natural seawater, equipped with high speed and on-site produce Soudium Hypochlorite Solution.

Seawater Treatment and Disinfection:-

• Power Generation

• Desalination Facilities

• Coastal Industry

Brine Electrochlorinator using three common consumables: salt, water and electricity.  On-site generation is a proven, cost-effective, reliable and safe treatment and bulk sodium hypochlorite disinfection.

Platinized Titanium Anode for Water Ionizer and Water Electrolysis:-

Platinized Titanium / Niobium Anode for Water ionizer Water Electrolysis Function water treatment and hydrogen gas generator with customized size. Constantly introducing advanced technology and equipment, our factory is able to offer you anode products with extremely high electrochemical performance, large capacity and lasting service time at competitive price.

Platinized Titanium Anode for Industrial Wastewater Treatment:-

With the development of industry, organic wastewater discharge is increasing, especially high concentration organic wastewater in the fields of chemical and pharmaceutical emission. With high color and high toxicity, it contains a large number of biodegradation-resistant components. Electro catalytic oxidation water treatment, which has been applied in hydrocarbon, alcohol, ether, phenol and other organic wastewater treatment, has many advantages: no need to add any chemicals; small size; small space occupied; and does not cause secondary pollution.

Advantages of Wastewater treatment system:-

1.         Degrade stubborn or toxic contaminants

2.         Fully automatic operation, simple process

3.         Suitable for high salt load

4.         No sludge, no pollution transfer

5.         Degrade COD, decolorize

6.         Inactivate and sterilize

The majority of electroplating processes today, utilize platinized titanium perforated anodes. These anodes serve two purposes, first of all to act as the supply source for the metallic ions needed for plating, and second to assist in distributing the current being drawn by the plating bath. Platinized titanium perforated anodes allow the escape of gas bubbles forming on active surface. The platinised titanium perforated anode surface serves as a base for the electrocatalytic activation layer.

Platinized Titanium Perforated Anode Advantages:

Platinized titanium perforated anodes are having longer life & stable operation

Platinized titanium perforated anodes are lightweight and easy to handle

Platinized titanium perforated anode needs very minimum maintenance cost

Platinized titanium perforated anodes are having good electrical conductance

Platinized titanium perforated anodes meet a wide range of electrolysis needs

Platinized titanium perforated anodes required minimum installation time and cost

Titanium-based Platinum Plated Anode is the best choice for plating noble metal. Platinum titanium anode is an insoluble anode, platinum plating and titanium substrate with a solid, stable performance, can replace pure gold, pure platinum anode, for gold and other precious metals plating tank.

Technical characteristics: high current efficiency; excellent corrosion resistance; long electrode life; electrode shape can be designed according to user needs; electrode substrate can be reused several times; no pollution to the medium (electrolysis); can withstand higher Current density.

Major benefit of the Platinum plated Titanium Anode is that they require no touching up due to the dimensional stability of Pt/Ti anodes and the high-temperature electrolysis that allows up to 99.99% purity in platinum coatings, as well as excellent adhesion and ductility.

Common applications of the Platinised Titanium Anodes:-

• Electro dialysis.

• Electroforming.

• DSA Cathodic Protection.

• Electrochemical Sensing.

• Electro winning and refining of metals.

• Electrolytic Regeneration of chromic acid.

• Electroplating for precious and base metals.

• Electrolytic recovery for precious and base metals.

• Electrolytic Production of Sodium Hypochlorite.

• Electro synthesis of Inorganic & Organic chemicals

Electroplating anodes are used to create products in many industries, including the hydraulic industry. The most common uses for electroplated products are chrome-plated oil pump auger flights, hydraulic cylinders, conveyor flights, sheets and tanks where it would be impractical or too expensive to make the item entirely out of the plating metal.

Platinum is one of the six metals in the "Platinum" group of precious metals, all of which are excellent catalyst materials. Platinum is conductive, chemically stable and highly resistant to oxidation and corrosion. It has a silvery-gray color and can be polished to a variety of finishes.

Platinized titanium anodes should be replaced when they start showing signs of flaking or chipping away of the platinum coating or a discoloration appears. Care should also be taken to replace soluble anodes when they become too small.

Major Applications:-

Hard chrome plating (piston rings, printing cylinders, etc.)

Precious and non- precious metal electroplating

Electronics and semiconductor industry

Electrolytic recovery of metals

Chemical process engineering

High speed Gold, Silver, Platinum and Palladium applications

Tiaano manufacturer of corrosion-resistant Platinized Titanium anodes for electroplating applications. Platinum coated (Platinized) Titanium Anodes are highly conductive anodes used in electroplating. Platinized titanium metal anodes are most suitable for wet electro deposition of precious metals like gold, platinum, palladium, chromium, nickel and copper etc. Typical ApplicatPlatinised Titanium Rod Anode for Gold Plating Applicationions of Platinized Anodes are Gold plating-Jewellery Jewels, Printed circuit board industries, chrome plating, Hard Chrome plating, Fuel cell, Rhodium plating, Iron plating, Anodising plant, Copper plating, Silver plating, Ohmic heating of food, Sensing elements, Gold electroforming, Electro refining or , Electro galvanizing, Palladium plating, Nickel/Zinc/Tin plating, Cathodic Protection, Electrodialysis, electro chlorination.

Tiaano offer premium quality range of Platinized Titanium Anode. In adherence to the set industry standards, our provided anode is well-manufactured using high grade raw material and latest technology. Owing to its corrosion-free and fine finish, to ensure the best quality, the offered anode is stringently tested by our quality experts against different quality parameters.

Tiaano anodes are available for beakers with volumes of 0.5, 1.0, 2.0, 3.0 and 5.0 litres. Special requests in view of dimensions and shape can be considered. Applications of Beaker Anode is Laboratory plating tests in standard beakers (e. g. for plating samples or small batches).

Beaker glass anodes are either platinized or coated with mixed metal oxide (MMO). Selection of the coating as well as layer thickness and layer weight depend on the customer´s application. They have replaceable anode segments which are fixed to a holder and can be exchanged.

Advantages of the Beaker Anode:-

Simplified handling

Optimum anode surface

Long lifetime

Stability in the beaker

Simple set-up

No complicated wiring

Replaceable anode segments

Configuration of Anode and Cathode:-

The negative (-) cable is connected to the item to be plated, the cathode.  The Positive (+) lead is connected to the solution electrode, the anode. In this configuration the piece being plated should be rotated occasionally since the deposition rate may be greater on the areas that are facing the anode and less on the side opposite the anode.